Bugs fixed in SGE 6.2u6 since release 6.2u5 ------------------------------------------- - 6727419 net continue SGE_Helper_Service.exe STOPS the service - 6642653 no accounting information for Windows GUI jobs - 6690798 BDB server uninstallation does not work correctly - 6847566 jobs get scheduled but are not started after global host changed - 6855837 qmod -rj should reschedule a job only when run with root/sgeadmin privileges - 6874076 speed up scheduler times for multiple large reservations requesting identical resources - 6891450 adding a resource request via jsv_sub_add_param will change the default of a BOOL attribute to false - 6902958 intermittendly, interactive jobs die - 6916648 h_vmem JOB consumable fails only in the IBM platform - 6921115 qconf segfaults on bad subordination string - 6934109 high cpu load of qrsh -inherit when using builtin interactive job support - 6941569 ENABLE_RESCHEDULE_SLAVE=1 causes also other jobs to be rescheduled - 6941838 qmon has segmentation fault when submitting a job with a jsv url - 6946781 gui-installer: NPE is thrown after "Browse" button is pressed - 6947548 AR handling is wrong in interaction with parallel environments - 6949505 jobs get not killed when attached adavance reservations expire - 6951371 ENABLE_RESCHEDULE_SLAVE=1 doesn't work anymore - 6951469 rerun of a parallel job when execd and job dies is not triggered - 6952525 execd sends signals to shepherd pid even if shepherd is no longer running - 6904099 qmaster crashes with the error message in cqueue_list_locate_qinstance - 6937272 remove experimental comment from qsub -tc help output - 6945450 new slotwise subordination (preemption) disabled state needs to be reflected in man pages - 6953013 slotwise preemption does not take amount of slots of pe tasks into account when unsuspend/suspend - 6932534 slotwise suspend on subordinate with parallel jobs does not signal newly started parallel jobs - 6945793 slotwise preemption / slotwise subordination scheduler threshold is ignored for parallel jobs - 6910082 make new interactive job support not use threads - 6934948 java DRMAA Error: Can't send response for this message id - protocol error - 6935186 pe_min value is not correct in JSV if multiple slots ranges are requested - 6587196 gridengine/i18n testsuidroot messages not i18n'd - 6743005 SMF - qmaster service should be used on failover back to qmaster host - 6862147 scheduler "categories" should use normalized values for "memory" resource requests - 6874648 On Windows Vista Enterprise, sgeexecd can fail to start up at boot time - 6921362 slotwise subordination allows jobs to be scheduled to a "suspended" queue - 6934090 wrong vmem reporting of qstat and qacct on Linux - 6942107 unexpected default masterq with alloc_rule=$fill_up in some cases - 6944132 gui-installer: can not add list of ip addresses to the table - 6944216 shadowd SMF service fails to start qmaster on reboot - 6945468 on Windows hosts reporting their full qualified hostname, certificates got wrong names - 6946262 Saving incorrect complex value on host level leads to qmaster segmentation fault - 6948008 if spool directory already exists, installation fails to detect that it is on a local drive - 6951479 old execution daemon tries to communicate with new qmaster each second - 6951505 using old client binaries on a new qmaster does not lead to abortion - 6952957 insufficient user name parameter checking for Certificate Authority related commands in juti lib - 6953633 is_alive() check always returns CL_RETVAL_OK, even if component is not running - 6954671 on Windows Vista, the 2nd fork of the daemonizing execd sometimes fails at boot time - 6955445 Requesting any memory limit for a job on linux doesn't work - 6956905 on csh, %CTRL-Z doesn't properly suspend the "qrsh -pty yes " client - 6958504 qrsh with prolog and epilog configured may fail with invalid stdin/out/err path 1949 6906466 non well-formed XML output from "qstat -xml" 2962 6909608 authuser fails on SuSE Enterprise Linux 11 3002 6831553 keystore password should be asked for twice to avoid typos 3019 6837493 gui-installer: use gethostbyname and gethostbyaddr binaries instead of Java InetAddress class 3061 6852173 improve Ctrl-Z handling in builtin interactive jobs with "-pty yes" option set 3069 6855673 discrepancy between man page and behaviour of "qconf -dq $QUEUE" 3072 6856170 gui jobs on windows vista only starting when there is a user logged into the system 3095 6867807 add "-pty " switch to qsub 3100 6871013 in interactive jobs, tty or pty handles Ctrl-Z wrongly 3132 6883606 when using options "-w e" with qsub, job fails to run when exclusive scheduling is configured 3146 6738790 resource reservation is broken with SGE calendar 3147 6871606 BATCH and IMMEDIATE QUEUES concept need to be clarified in man pages 3148 6882584 parallel jobs do not always go to the least loaded host 3190 6899641 qrsh hostname: commlib error on linux 3193 6840703 sge_shepherd fails with SIGSEV on SLES 11Recently , so does sge_execd on shutdown 3216 6912529 rerun of a tightly integrated parallel job crashes qmaster after restart 3221 6916055 qsub "-tc" man page needs better wording 3223 6916492 execd does not verify the pe task start user in non CSP mode 3226 6903955 binding parameters parsing does not check number values completely 3228 6899014 jsv logging does not work when multiple users submit jobs on same submit host 3233 6920926 slotwise preemption fails to unsuspend one job per host 3235 6920592 modifying the global configuration make sge_qmaster unresponsive in a huge cluster 3236 6920597 exec host object gets spooled whenever an execd connects to qmaster 3237 6921246 finishing a tightly integrated job takes too long 3238 6903956 consistency of JSV binding information is not checked completely Bugs fixed in SGE 6.2u5 since release 6.2u4 ------------------------------------------- - 6849311 sgeinspect for windows cannot connect in SSL mode - 6876914 SGE_EXECD_PORT number is wrong in sgeinspect - 6878215 sgeinspect's example port 54322 is confusing - 6902868 reporting of core binding after execd restart contains an additional new line - 6896657 error parsing unsigned long value from string "..." - 6902891 upgrade from 6.1 to 62u5 fails because of missing newly introduced complexes - 6903987 with slotwise preemption, doubly suspended tasks are not always unsuspended correctly - 6904315 changing the definition of slotwise preemption relationships doesn't update all previous members - 6904437 configuration of forbidden slotwise preemption relationship structures is not detected 26 6883585 click on certain host -> java.lang.NullPointerException 35 6538365 a more flexible suspend on subordinate scheme 41,27 6883583 job list does not update automatically 2987 6827877 sgemaster script might return 0 on failure 2989 6828316 shadowd uninstallation does not remove local host configuration 3086 6860857 add ability to commlib to wait for data on external file descriptors 3120 6876446 JMX part of qmaster installation should verify JVM is 32-bit or 64-bit 3129 6880212 modifying the global configuration triggers spooling of all exec hosts 3139 6885673 upgrade problems with jvm thread when upgradeing from 61 to 62 3140 6885690 upgrade problems with max_advance_reservations parameter when upgradeing from 61 to 62 3145 6885532 qstat/qhost xml's xsd links are obsolete 3149 6882596 need to include Hadoop integration 3150 6882592 need Java binding for JSV 3151 6883285 JSV.pm does not recognize -A option when used with qsub 3152 6883957 qmaster aborts when submitting a job depending on a just finishing tightly integrated parallel job 3154 6882142 binding jobs to processor cores (job2core binding) 3163 6892804 shadowd startup scripts do not work 3164 6892908 shadowd might be started on host which hostname is a prefix on real shadow host 3167 6895073 possible race condition in drmaa implementation when event clients report errors 3168 6895510 Windows execd installation does not create proper certificates 3170 6858356 execd cannot get rid of not existing task which results in qmaster <-> execd protocol loop 3172 6854020 fstype returns NFS instead of NFSv4 on non-solaris hosts 3173 6894239 cannot install dbwriter as root when $SGE_ROOT/dbwriter is owned by root and admin_user!=root 3176 6896663 SGE distinguish between short host name and full name with the domain 3178 6888406 qsub -sync does not return correct exit status during qmaster failover 3179 6901597 cpu time in accounting file is wrong for PE jobs with accounting_summary set to TRUE 3181 6901594 sgemaster -migrate does not work if host is using SMF qmaster service 3182 6901591 sgemaster script does not print error message when sge_qmaster fails with not zero-exit code 3183 6901956 wrong qhost help output regarding topology based information switch 3184 6903526 adding host to hostgroup causes extra slot-only queue instances 3185 6903978 interactive jobs get superfluous error message when they can't be scheduled 3186 6902905 updating to 6.2u4 causes already running jobs to be "lost" 3187 6902920 dbwriter.conf can not be read during upgrading dbwriter 3189 6900836 sge_qmaster crashes without a coredump with message from sge_smf_contract_fork() 3190 6899641 qrsh hostname: commlib error on linux 3191 6903984 auto installation results in endless loop with wrong SGE_ROOT 3193 6840703 sge_shepherd fails with SIGSEV on SLES 11Recently , so does sge_execd on shutdown 3196 6902923 dbwriter installer shows error message if SGE_ROOT is not set 3197 6905290 older clients get no error message when trying to connect to a newer qmaster 3198 6894171 using spooledit list while sge_qmaster is running can corrupt BDB server 3199 6646780 sgebdb stop does not work 3200 6869159 SGE can't handle multi-line environment variables 3204 6904690 qsub -sync does not return correct exit status when qmaster is shutdown and restarted fast 3205 6907931 qmaster autoinstallation might never exit if installation template contains invalid SGE_ROOT Bugs fixed in SGE 6.2u4 since release 6.2u3 ------------------------------------------- - 6851151 Application needs to prompt for keystore or user password after restart - 6876489 common package lacks 2 jar files for sdm and sge inspect - 6889423 sgeinspect.sh script file delivered in common and sgeinspect package - 6872473 qmaster installation might fail when more than 1 qmaster is installed in parallel on the same host 2942 6675570 qconf -ke[j] must return non-zero exit code on failure 2342 6590010 Original primary group vanishes after newgrp command (USE_QSUB_GID=true) 1314 6287864 online usage of maxvmem incorrect for tightly integrated parallel jobs 1636 6291037 Relationship between suspend_threshold and scheduler_interval needs to be documented 3055 6494492 man page of sge_ckpt points to wrong reference in queue_conf 3063 6618009 autoinstall fails if spooling dir (BDB) already exits without any error mgs/log file being created 3046 6659197 cluster name check is failing in installation 3053 6684465 removing admin user from the manager list leads to a qmaster dead lock 2542 6684887 allow users to limit concurrent array job task execution 3064 6688019 qmaster uninstallation fails when BDB RPC server is used 3056 6713724 man page for drmaa_control() refers to deprecated parameters 2716 6744724 interactive jobs (qlogin, qrsh without command) don't set the TZ environment variable correctly 2724 6747515 SGE 6.2 auto installation does unnecessary check on SGE_JMX_PORT and prints a misleading suggestion 2727 6747579 automatic uninstallation failed when using -jmx option 3076 6750689 syntax error for empty SGE_QMASTER/EXECD_PORT 3104 6760650 RC script removal is broken if SMF is used 3062 6769515 inst_sge -copycerts exits without error message when called for a cluster having no certificates 2804 6773668 more spooling ops than needed during job start order processing for seq jobs 2805 6774120 task spooling always causes job be spooled as well for array jobs with classic spooling 3078 6786258 Man page should mention reprioritize_interval is coupled to scheduler_interval 3083 6797353 autoinstall of Windows exec host hangs in GetLocalSpoolDir 3084 6798623 Windows exechost install failed to create the local spooldir 2907/ 3081 6802751 execd installation on Windows doesn't provide global spool dir as default, even if it's local 2944 6806917 Berkeley DB server auto installation does not work when HOSTNAME_RESOLVING=true 3079 6806918 Man page entry for SCHEDULER_TIMEOUT incorrectly states that default is 600 3070 6808082 $SGE_ROOT/util/setfileperm.sh does not change ownership of $SGE_ROOT/start_gui_installer 2924 6808646 DrmaaSuite.java imports are too broad 2899 6810411 bad RQS syntax can crash/hang qmaster process 3082 6822285 windows exec autoinstall fails if spooldir was already created with wrong perms/ownership 3068 6823365 h_vmem setting as JOB consumable fails to properly set the virtual memory limit of a job. 3105 6830974 permission problem during local config creation 3106 6831541 should ensure qmaster spool dir is empty before continuing the qmaster installation 3107 6832008 smf support was not enabled but getting a error with SMF dependecy error 3066 6834894 inst_sge shows wrong dialogs during csp certificate installation 3071 6842457 qmod -usj jid returns error status even though job is suspended 3040 6847548 qalter -w p reports running jobs for jobs that are rescheduled due to queue error 3108 6848042 Upgrade script from 61 to 62 requires working ssh connection to remote hosts 3109 6848095 calling inst_sge -auto with non-existing file argument leads to an error 3043 6849718 inst_sge -ux does not report error if hostname resovling is inconsistent 3058 6849741 qalter man page does not imply that qalter works also on running jobs 3058 6851538 qsub man page does not mention the existence of $JOB_SCRIPT environment variable within a job 3085 6855413 SGE does not handle multiline variable using qsub -v 3110 6856564 inst_sge -copycerts no longer works when no JMX or CSP mode used 3075 6857639 qrsh with command doesn't always set a new process group for the job 3122 6861758 processor set does not work on Solaris architecture 3088 6862580 Submit client or master might fail if JSV is enabled and environment contains fprint format spec 3091 6862617 qstat -help exits 1 3089 6862641 JSV Protocol is not handled correctly in client JSV 3111 6865717 need means to set the jsv command timeout 3094 6867805 ACCT_RESERVED_USAGE is broken 3096 6867897 qsub -sync does not connect to shadow master after failover 3097 6868133 qmon does not reconnect to qmaster after shadowd takeover 3098 6869559 resource leak in juti - streams not closed after command execution 3113 6873140 too many qsub -sync jobs wedge the qmaster on failover 3126 6873408 Scheduler crashes with got NULL element for CE_requestable 3102 6874070 JMX gets disabled in the autoinstallation if SGE_JVM_LIB_PATH set is to "" 3117 6875947 CSP qmaster installation displays confusing message that suggests a failure if qmaster=execd 3121 6876458 sge clients/daemons segfault when bootstrap file is corrupted 3123 6876508 management.properties file should only be readable by admin user or root 3125 6877580 Upgrade JMX logic misleading 3124 6877588 SMF services should be started even when different SMF service starts them 3128 6880144 jgdi can not convert exec hosts objects with reporting variable 3130 6880888 automatic execd uninstallation does not work on CentOS r4u5 3131 6880894 Automatic execd uninstallation might not work Bugs fixed in SGE 6.2u3 since release 6.2u2_1 --------------------------------------------- - 6830972 error message when testing JAVA version - 6786381 gui-installer: silent installation support - 6806241 gui-installer: admin/submit error handling is confusing - 6242663 dbwriter and reporting installation documenation has to be changed due to the fix of issue 6240658 - 6517628 job exit codes explanations are incomplete in the N1GE user's guide - 6545757 adding sge_statistic tables description - 6684943 spooldefaults does nothing when SGE_ROOT is not set - 6729416 LSB insserv in Suse does not handle new RC script names correctly - 6783301 users guide should have a section that explains job chunking - 6786350 gui-installer: when moving columns the sorting stays in the column index not on the column ifself - 6786393 Need support for parallel shadowd installation - 6816037 problems with gaussian due to memory limitations of SGE - 6821250 dependecy error wenn installing 6.2u2_1 rpm patches - 6830897 Startup of qmaster fails on HP11/HP11_64 during installation - 6830975 unsatisfied link error exception - 6831094 gui-installer: CSP installation might fail when qmaster!=startup node - 6831971 gui-installer: let's the user uninformed about the user who's running the installer - 6834855 gui-installer: Next button is not disabled during the installation - 6844300 gui-installer: Exception when reading empty line in managemenent.properties file - 6844305 gui-installer: Empty JMX screen displayed in custom standalone shadowd installation - 6847167 qconf -sstree fails with NULL object pointer passed to function "" message - 6848366 wrong argument syntax could cause qmaster crash - 6851480 common packages contains wrong legal files 616 6739139 the configuration of the scheduler and master has been changed 641 6739197 binary submission / script submission 643 6832360 Deadlock in jvm shutdown process 645 6834875 Resources end up in ERROR state (EXECD_DEL event timeout) 649 6837412 RP assigns too many resources for a need 651 6838346 GEAdapter clears static flag for resources moved with -static option 654 6839438 Service ends in strange state after 'sdmadm sus' command 659 6842095 Improve error message when local VPN client cannot be started up correctly 663 6842882 Crashed managed host causes a 10 min delay in show_component command 664 6842887 Too short "wait for resource removal" timeout 666 6844741 No cloud resources start up but cloud shows started hosts 670 6851541 bootstrap file on cloud resource has wrong permissions 1521 6244911 qmod -r does not delete the old instance of a job before a new one is started 2056 6816705 incorrect referrences to "SGE_H_ALIASES" man page 2103 6816634 SIGUSR1 clash between s_rt and NOTIFY_SUSP 2408 6619384 qconf -dhgrp can delete a host group referenced from a queue instance 2510 6838487 poor qacct -j performance 2572 6648160 SGE util/arch script is broken for AIX 5.3 Operating System 2629 6731441 provide Exclusive Host Scheduling 2735 6751413 cannot delete qlogin job - qlogin job hanging 2759 6761993 stopping an execution daemon does not stop jobs 2787 6774196 accounting_summary in PE only adding cpu/mem/io 2801 6773642 problem with broken dot-file writing for sequential jobs in classic spooling mode 2833 6784919 qmaster csp installation fails when using port from /etc/services 2876 6810688 fix qsub truncation of scripts 2900 6823756 qmaster fail-over results in very slow execd reconnect 2901 6807072 fill_up is oversubscribing one node instead of distributing to other free nodes. 2904 6801748 jobs started with -l dwg=true can't display their GUI on Windows Vista and Server 2008 2914 6805845 classic spooling method (flatfile spooling) should be more error tolerant 2917 6806219 JSV -w param has wrong value inside script 2923 6806363 DRMAA test_drmaa_perf produces segmentation fault when using user .sge_request file 2934 6808617 a running qsub -sync y session doesn't handle the shutdown signal from a qconf -kec all 2938 6810493 Changing "w" job parameter to "n" in client JSV is not handled correctly 2939 6806324 qsub man page refers to "see -jsv option below" but it is above in some cases 2940 6806209 The cluster config paramter jsv_allowed_mod does not work -w switch 2946 6814059 c_occasion job parameter can't be changed by JSV script 2947 6814060 influence of c_occasion on c_interval and vice versa is not documented explicitly in JSV doc 2953 6815435 qmaster reports commlib read error in message file when qconf -m(s)conf fails 2957 6810490 a qmaster not running a root exits with return code 1 if a JSV script to start as user is configured 2958 6818825 some variable names can't be used in Bourne shell JSV scripts 2960 6819649 qconf -m* reports misleading error if tmp dir is not writeable for the user and needs 100% cpu 2961 6746960 misleading execd logging "Can't get load values" on AIX 2963 6821207 "qconf -Mc " gives no output in case of success 2964 6821237 built-in complex "display_win_gui" is not protected against remove 2967 6755146 qrsub allows to request a non existing checkpoint object 2972 6824346 qalter -h U fails with CULL error 2975 6823086 scheduler profile reports accumulated values instead of actual values per profiling period 2977 6746750 need tight integration accounting and sharetree usage according to reserved resources 2986 6802351 we need the ability for qrsh to ignore SIGUSR1 and SIGUSR2 to support -notify 2995 6817190 in case of errors, the return values of the SGE_Starter.exe are not handled correctly 2996 6817193 add logging to SGE_Helper_Service.exe 2998 6825381 JSV: Changing CMDARG[1-n] always changes the first commandline argument. 2999 6825376 JSV: Number of arguments is handled as read-only parameter 3005 6831573 jgdi SSL connections from one client jvm to different SGE cluster might not work 3006 6832406 shadowd startup script returns error if SMF support is enabled 3008 6834901 Install script do not recognize OpenJDK as valid Java version 3009 6816902 loadsensor infrastructure in the ibm platform is inconsistent 3010 6834507 SGE locking implementation may lead to write lock starvation 3013 6832457 parallel job submission verfication result differs when turning on non-restricting resource quota 3014 6827155 qmaster crash in schedd_mes_add_global/lGetPosViaElem 3016 6836897 Classic spooled sharetree does no longer set correct leaf ID 3017 6811202 inconsistent signal delivery behavior with and without -notify 3018 6825385 the path to PE_HOSTFILE variable may not be set for pe slave tasks 3020 6838070 exechost wrongly named "exec server" in qconf -help 3023 6838220 man qmod synopsis mentions only queue and omits job 3024 6499573 qacct does not resolve complex shortcut names 3026 6782283 qhost failed to filter the resource request correctly 3027 6835592 gui-installer: qmaster installation validation always reports JMV lib missing if not set properly 3031 6841529 redirecting "qrsh -pty yes" output to a file or a pipe doesn't work 3033 6842629 load_sensor script does not comply to protocol 3034 6842644 qconf error message for EXCL bool without comsumable flag is incorrect 3037 6810076 english language issues in install_qmaster 3039 6843269 qhost man page needs to clarify how it handles multiple resource attribute requests 3040 6833511 qalter -w p output fails to match qstat -j output 3041 6845162 spelling errors in the man pages Bugs fixed in SGE 6.2u2_1 since release 6.2u2 --------------------------------------------- 2949 6814823 Update to 6.2u2 fails with error "wrong type for field CE_consumable (lBoolT)Abort" Bugs fixed in SGE 6.2u2 since release 6.2u1 ------------------------------------------- - 6285245 New parameter DURATION_OFFSET in sched_conf(5) should be described in admin guide - 6355464 CSP documentation is confusing and partial wrong - 6518002 qdel -t not documented in man page - 6637141 New -hold_jid_ad option must be covered in 6.2 Users Guide - 6675023 qconf -kej should remove jobs and then shutdown execd - 6704958 description of qsub -notify option is inadequate - 6709535 changes in Advance Reservation dialogues due to fix of 6706406 - 6738108 information of bootstrap file is missing in admin and install guide - 6738122 "Using Files and Scripts..." is not complete in wiki - 6738131 Explanation for queue priority parameter is missing in wiki page - 6776017 non-multiplied job consumable need to be covered in documentation - 6776026 The new qalter/qsub -w p switch need to be covered in the documentation - 6784558 man page sge_conf - enforce_user is not by default false but auto - 6786338 gui-installer: should check bdb server spool dir permissions on the remote host - 6786371 gui-installer: Should warn a user that some of the selected components were not really selected - 6786384 gui-installer: GUI installer should generete auto_inst file before starting with the installation - 6790504 gui-installer: CSP installation does not work properly - 6793169 gui-installer: it's not possible to switch-off 'service automatic startup' feature - 6799964 gui-installer: on result panel the 'Save as...' button pops-up an open file dialog window - 6799969 gui-installer: The spool directory text field is missing on spooling configuration panel - 6799971 gui-installer: check_host script does not work properly with rsh - 6799976 gui-installer: improve host state cell tooltips to show exact values from configuration - 6800509 gui-installer: admin/submit hosts not set properly - 6800511 gui-installer: Standalone execd installation must read in values from bootstrap file 100 6738140 admin guide for new qconf options -secl and -kec 104 6738144 enforce_user not documented in administrators guide 233 6738586 Multiple load sensors may be configured 498 6288944 SCHEDULER_TIMEOUT needs to be documented in sge_conf man page 505 6288945 sge_execd may crash at start-up time due to fd_set used incorrectly in sge_close_all_fds() 877 6739237 Appendix A on the Arco setup document should mention that Solaris kernel tunables must be changed 1197 5082660 aborted slave task on tight integration job generates error log in execd 1663 6285117 Reference to deprecated qmod options 1768 6317028 quotes in job category or native specification can result in memory corruption 1776 6320659 qstat -j XXX -xml schema not well documented 1806 6326191 execd: "ptf complains: Job does not exist" message in log file 2058 6792604 shell_start_mode should be documentated to be only used for batch jobs 2208 6535332 qsub(1) explanation of -b n shall mention performance impact 2215 6788577 qconf -Msconf filename at wrong position in man page 2268 6399453 max_unheard default value in sge_conf man page has incorrect value 2273 6575730 default value for finished_jobs is wrong in sge_conf(5) 2291 6575742 load sensor information is incomplete in sge_execd(8) 2318 6575743 shepherd_cmd is missing from sge_conf(5) man page 2329 6579326 end of parallel job doesn't kill subsequently added, longer running tasks 2389 6788579 man qconf should mention sge_resource_quota(5) in "SEE ALSO" 2393 6695481 qrsh -inherit should access the 'rsh_command'-cache more persevering 2464 6686621 schedd_job_info can cause immense memory consumption 2551 6702908 SGE sometimes too strict with its complete accounting principle 2594 6673742 qmaster reinstall overwriting an existing installation fails 2682 6732134 broken output with qstat -r when a job requests more than a single queue using -q wc_queue_list 2732 6344900 man queue_conf section on subordinate list is a little unclear 2742 6749902 sge_qmaster might crash when schedd_job_info is turned on and qsub / qalter -w is used 2750 6755684 qalter -w p JID command returns incorrect output when no jobs running under AR-reserved resources 2770 6769528 man qsub has wrong formatting in -C section 2784 6743012 upgrade in copy mode should suggest spooling method from the backup first 2789 6751310 inst_sge -rst: doesn't restore resource_quotas and advance reservation with classic spooling 2790 6764942 Dbwriter is not starting after reboot of the machine. 2791 6751309 inst_sge -rst: can't resolve username "none" 2793 6773584 sge_resource_quota(5) should warn that resource quotas are not enforced as job resource limits 2796 6315286 ibm-loadsensor should be automatically copied to correct location during install 2797 6774221 inst_sge -x -auto ... fails 2798 6774228 inst_sge -m -jmx may never finish 2799 6724000 event generation needs to be analyzed and reduced 2803 6774811 master installation with JMX support fails on DARWIN 2806 6774847 on Windows, execd installation fails when hostname command returns full qualified name 2809 6776137 qmaster exits with lGetString: wrong type for field JG_qhostname (lHostT) 2815 6728379 incomplete accounting for the last short tasks of tightly integrated parallel job 2823 6782086 several auto installation problems with jmx mode 2827 6784461 project(5) man page should say that "acl" set to "NONE" means "all users" 2836 6785207 TCL server JSV script does not work on some architectures 2837 6786152 execd job start might produce communication errors because of not posix compliant fork() system call 2838 6786247 enforce limit option might fail when execd for a slave or master parallel task is restarted 2839 6786343 qresub for job in hold state produces new job with same job id 2840 6786406 qmaster reports commlib read error in message file when qstat -j is executed 2841 6785777 submit(1) man page reports that qrsh does not support -display option 2843 6786957 The reprioritization code is inefficient and executed even if feature is disabled 2846 6787485 TMPDIR of the master task is sometimes not cleaned for tight integration jobs 2848 6788512 "echo_raw -e" without further parameters causes segmentation fault 2849 6788514 read_raw doesn't return 1 on EOF 2850 6788539 qalter -h u fails if a jsv_url is configured 2852 6788570 insufficient error message from JSV if script fails 2853 6778386 the man page accounting(5) is missing info about 2 new fields introduced in 6.2 2854 6788644 qalter rejects other modification if -w is not explicitly allowed in jsv_allowed_mod when JSV is use 2855 6788646 qalter rejects modification of hold state if -t is not also allowed in jsv_allowed_mod 2856 6788647 Tight pe job might stuck in system although enforce_limit parameter is set. 2857 6788649 Impossible to change -i -e and -S via JSV 2858 6788665 Impossible to delete -ckpt via JSV if -c was still set 2859 6788651 Pe range (pe_min, pe_max) can't be modified via JSV 2860 6788652 Master rejects job if JSV verification process takes longer than 10 seconds. 2861 6788654 Documentation of JSV scripts is missing. 2862 6741415 sge_pe man page should document that job_is_first_task is evaluated if wallclock accounting 2863 6789620 JSV(1) man page issues 2864 6791556 Sequence numbers broken for parallel jobs when multpile queues are used 2867 6609691 sgepasswd(1) is missing SGE_RANDFILE variable and default pathes are wrong 2868 6791931 qping aborts when connected to an execd running a tightly integrated parallel job 2869 6792542 SQL queries don't display all column values and saving of the result causes an exception 2873 6784258 man sched_conf minor corrections 2874 6793547 missing fields in qmon 2875 6793554 wrong certificate path for jmx with /etc/services 2877 6792704 no scheduler activity to schedule pending jobs when the qmaster installed on RHEL4 2878 6794303 qmaster param SCHEDULER_TIMEOUT is used for all event clients 2882 6796175 calling drmaa_exit before any calls to drmaa_init results in segfault 2883 6795248 Critical message gets logged if a fresh queue is created with a subordinate_list 2884 6796068 Queue Subordination is broken if new queue instance must be suspended at creation time 2886 6793687 Subordinate suspension state can not be changed 2887 6797579 hostgroup modification leads to huge qmaster memory use 2888 6797581 the load_sge_config.sh script fails to restore the configuration in big clusters 2890 6793076 internal event clients, like the scheduler, do not reconnect after timing out 2895 6799028 hostname resolving problem might cause execution daemon shutdown 2896 6799032 Resource Reservation uses infinity runtime instead of default_duration for unbound running jobs 2897 6799088 using IP String in first column of host_aliases file produces dead lock 2903 6801151 qrstat -help shows advance reservations 2908 6802883 spooledit might crash undumping big objects 2910 6802994 test_java_drmaa_perf.sh crashes 2912 6804721 qacct -j option parameter is described wrongly in qacct(1) man page 2915 6805914 qrsh (new interactive job support) does not work with host aliasing 2920 6804626 qmon: duration and end_time fields in Advance Reservation Window are both effective 2927 6808084 inst_sge -x -auto will end up in infinite loop for windows hosts 2928 6808089 inst_sge -copycerts in AUTO mode does not work 2929 6800497 Autoinstallation on loopback interface fails with exit code 0 2930 6808600 ADMIN_USER not used in auto install mode 2931 6808604 ShutdownQmaster - can't use SMF when not root 2932 6808597 qmaster auto installation with jmx will fail if CSP_RECREATE flag is not set 2933 6808594 autoconf doesn't need JMX args for execd uninstall Bugs fixed in SGE 6.2u1 since release 6.2 ----------------------------------------- Issue Sun BugId Description -------- --------- ------------------------------------------------------------------------------------------ - 6702511 qdel man page: The wording for the -f option is misleading - 6682558 wrong scheduling decision when job-id's roll over to 1 - 6776011 Missing files in SGE62u1 patch - 6760646 Execd uninstallation does not remove the SMF service 551 6734244 MaxPendingJobsSLO is not working 555 6735232 MaxPendingJobsSLO can produce a swinging system 585 6765524 GEAdapter with static resources ends up in ERROR state 586 6765535 GEAdapter resets accidentally the static flag of resources 1741 6319223 subordinate properties lost on qmaster restart 2240 6554872 qsub -w e does not acknowlegde dynamic load parameters 2253 6558329 DRMAA does not remove -sync option 2279 6575735 weight_priority is missing from sched_conf(5) 2280 6575737 loglevel default is wrong in sge_conf(5) 2453 6647720 database version upgrade needs to be enhanced 2594 6673742 qmaster reinstall overwriting an existing installation fails 2626 6717825 All foreign and primary keys in dbdefinition.xml should be defined as bigint 2663 6727809 interactive jobs to a Windows host take up to 1 minute to end 2679 6729441 memory leak in sge_execd with qsub -v SGE_* or qsub -V 2680 6730487 qalter -w v is not verbose 2683 6733626 ARCo should support SJWC 3.1 2684 6734764 qhost -l h= does not work in combination with any other resource request 2685 6735875 sge_ca script fails for installation as root user 2690 6734854 installation script for reporting "assumes" correct permission settings for installation files 2693 6622128 usage output cleanup for client commands 2694 6739725 Cannot choose admin user when installing as root - installation fails 2696 6740388 reporting installation fails with SJWC 3.0.x if $JAVA_HOME is not set to java version at least 1.5 2697 6740404 dbwriter installation doesn't exit when an SQL error happens during database install/upgrade 2698 6740420 Upgrading dbwriter from 6.1u4, 6.1u5 to 6.2 fails on MySQL 2700 6738091 execd fails to reconnect to shadow master host 2707 6742941 Installation might fail if SGE_CELL directory exists 2708 6742976 parameters are not replaced during database connection test 2709 6743001 Parallel execd autoinstallation might fail when using only SMF 2710 6743003 Service Tags support displays messages on qmaster startup/shutdown 2712 6743431 dbwriter installation fails if admin_user in bootstrap file is 'none' 2716 6744757 interactive jobs (qlogin, qrsh without command) don't set the TZ environment variable correctly 2717 6744738 once scheduler monitoring has been enabled, it remains on permanently 2722 6745913 dbwriter keeps crashing due to inability to close the open cursors. 2723 6567413 Parameter PE_RANGE_ALG is shown as SELECT_PE_RANGE_ALG in the man page of sched_conf 2726 6727295 qresub on -b y jobs raises wrong error condition 2728 6748854 Commlib does not compare hosts with strcasecmp 2731 6726233 qrsh -w v does not work 2734 6750834 in csp mode commlib clients do not respect commlib parameters for the first message 2736 6730437 overlap in -masterq and -hard -q causes problems with some allocation rules 2737 6752921 qalter allows a user to place a job in a project forbidden by ACLs 2741 6753642 Execd reconnect can take up to 90 seconds after qmaster restart 2742 6749902 sge_qmaster might crash when schedd_job_info is turned on and qsub / qalter -w is used 2743 6754094 h_rt limit enforcement gets delayed in case of execd restart 2744 6750325 qresub/qalter/qhold/qrls/qrsub/qconf/qping -help should return exit code 0 (instead of 1) 2745 6749921 man page indicates that qresub has the option -V and help output is confusing 2746 6752920 qalter -h n requires manager privileges/ qresub deletes the hold state while copying a job 2747 6754568 qmaster might be unresponsive for a time because of commlib timeout 2751 6637152 change SGE_Helper_Service.exe(8) man page 2752 6709552 qconf -Aconf modifies existing configuration 2753 6710511 spooldefaults dumps core when bootstrap file does not exists 2754 6750688 SGE_EXECD_PORT gets accepted even when the same as SGE_QMASTER_PORT 2755 6748262 invalid exit code if host is removed from admin host list during installation 2762 6762505 RQS with non-consumable complex crashes scheduler 2771 6766830 Critical errors when updating von 6.1 to 6.2 with inst_sge -upd and inst_sge -upd-execd 2772 6767198 auto install fails with spooling via BDB server 2773 6765660 When updating from 6.1u? to 6.2 with rpc BDB the upgrading script does not delete spooldb directory 2775 6767234 shutdown problems of shepherd daemons with new interactive job support 2778 6767792 inst_sge -upd prints help output of checkprog binary when PID text file is empty 2779 6767855 Updating from 6.1 to 6.2 is failing with classic spooling when using the old spool directory 2782 6768967 when upgrading from 6.1 to 6.2 with BDB RPC spooling using same database directory it fails 2784 6743012 Upgrade in copy mode should suggest spooling method from the backup first Bugs fixed in SGE 6.2 since release 6.2beta2 -------------------------------------------- Issue Sun BugId Description -------- --------- ------------------------------------------------------------------------------------------ - 6181171 bad documentation on qstat -j output - 6248737 dc_shell prompt is missing with qrsh - 6269470 arcorun should be documented in the manuals - 6279624 Incorrect documentation for latebinding parameters - 6289602 Need description of modifying ARCo bahaviour after initial install - 6295019 Sun N1 Grid Engine 6 Documentation: Cluster Queues vs. Queue Instances when subordinating - 6298080 We need a document which describes all dbwriter parameters - 6300789 /etc/init.d/sgemaster -migrate should be documented - 6353033 qrsh without command does not give online resource usage - 6364948 Update description of ARCo database model - 6371741 Describe possible problems when jobs are pending and password is changed in Windows domain - 6398703 N1GE6 Solaris packages installation instructions are incorrect - 6418175 need documentation for the arco updatedb script - 6462150 Administration Guide still contains reference to no longer existing 'maxgjobs' - 6469744 The qrsh command caused licensing error when accessing windows execution hosts - 6481737 Arco should support webconsole 3.0.x - 6525497 JGDI crashes JVM when null is passed to JNI GetStringUTFChars function - 6528484 qrsh does not work without NFS s-bit if binaries are kept on NFS - 6541412 Feedback on 6.1 beta documentation from OS community - 6559385 Calling JGDI getQueueInstanceSummary results in a memory leak - 6563438 User accounts in MySQL for ARCo - 6572196 Intermediate acct records are not mentioned in man reporting - 6574679 Need method for fast startup of MPI jobs - 6594812 Admin guide should explain 'cannot run in PE because it only offers slots' message - 6609726 Documentation mentions invalid parameter "weight_jobclass" - 6618315 qmon segfaults when trying to set functional policy - 6618323 qmon segfaults on trying to modify override policy - 6632830 ExecuteAsAdmin shorten the long command line arguments - 6640885 on Windows installation fails when installing as root and SGE admin user = none - 6655813 All occurences of DRMAA 0.5 and libdrmaa.0.95 needs to be removed for 6.2 - 6655818 6.2 ReleaseNotes need to mention DRMAA 0.5 and libdrmaa 0.95 are removed from the distribution - 6659854 wrong detection of sge_qmaster port in Qmaster installation makes installing impossible. - 6661146 splash screen for qmon GE 6.2 alpha still has old information - 6661510 In ARCo database installation guide users must be instructed to configure MySQL with INNODB - 6670264 Validation of the Filter List in Simple Query builder fails - 6684918 Problem with case sensitivity for queries in ARCo - 6686921 qrsh and qlogin has very slow response to user input. - 6692055 Exception when switching cluster in ARCo GUI - 6693980 Simple Query builder does not repopulate dropdown menus when cluster changed - 6702922 Grid Engine 6.1 Installation Guide still mentions SUNWsgee, SUNWsgeed, and Solaris 7 - 6708360 Grid Engine 6.1u4 documentation should state that web console 3.0.2 is supported - 6717816 Upgrade script failed when choosing a different port number then $SGE_QMASTER_PORT - 6717891 Auto install template value checking is too strict on COPY_COMMAND - 6718433 in csp mode, shephed cannot always read user certificates for interactive job support - 6718447 commlib errors of the connection between shepherd and qrsh client are not printed to stderr - 6718453 terminate method for interactive jobs doesn't work properly - 6722507 limits defined in /etc/security/limits.conf are not obeyed in interactive jobs - 6722652 upgrade does not create arusers user set - 6722805 upgrade does not save host_aliases file - 6722806 upgrade does not create display_win_gui complex - 6722920 upgrade does not save and restore sge_qstat, sge_ar_request,sge_qquota - 6722930 Java DRMAA static constants are accessed via object references and not via class references - 6723936 Upgrade uses same local execd spool dir in copy mode 72 6726206 Adding new system produces unreadable bootstrap directory names 213 4658706 msg size used in tight PE integr. job start sync. protocol should be smaller 420 6696915 serialVersionUID of jaxb generated classes 458 6702281 Modify Grid Engine complex mapping command uses a defect bundle message 468 6707031 Confusing error message while installing managed host 472 6708450 Service adapter must report resource request when its needs are fulfilled 476 6710436 monitoring commands "-h" switch relying on RegExpHost filter do not work properly 477 6710442 SCP assumes that service is down too soon 478 6710441 SCP performs full synchronization when it is not necessary 479 6710595 host uninstallation bad message 480 6710593 host unistall fials if spool is removed 483 6711006 full stacktrace shown when "-p" default option is wrong 484 6713852 adding multiple resources for example 3000 can lead to ambigous resources 486 6712084 Hostname resolving problems with loopback interface 487 6713234 GE service stays in RELOADING state 488 6713797 GE adapter contains resource in UNASSIGNED state 489 6714497 show services command different output style 498 6719595 GEAdapter sends RESOURCE_ERROR event after RESOURCE_REMOVED event 500 6721627 RP can not handle requests with quantity 0 504 6722161 History shows resource for RESOURCE_REQUEST entries 509 6724564 Managed host installation on master host corrupts bootstrap config 514 6725419 SDM needs to support service tags 523 6727853 multiple resource operations on GE cause that operations are rejected 527 6730545 Invalid state transition STOPPED -> SHUTDOWN @ GE-adapter shutdown 533 6248721 qrsh should pass INTR only to application 869 6288965 accounting: low precision of ru_utime, ru_stime and cpu 1052 6367643 Seamless Pseudo Terminal Support 1258 6670917 qrsh -inherit -nostdin fails when started with closed STDIN 1265 5097481 Admin guide: Effect of -p priority and weight_priority not described 1406 6287866 cannot submit to HPUX client using qrsh with no command 1606 6287915 qrsh -noshell executes shell resource files 1675 6289273 event client acknowledge and deregister request not always processed in sequence by qmaster 1751 6310194 use of the same pathes for input/output stream must be dealt with 1788 6518012 qmake runs out of secure ports 1832 6367649 Support array sub job dependancies/holds 1857 6344948 No description of RESTRING for Grid Engine complexes configuration 1942 6362866 qconf *stnode CLI commands not documented at all 2013 6403530 job exit code 100 must be described in chapter 8 of the Admins Guide 2084 6702768 Admin Guide: incorrectly says only QMON can be used to assign override tickets to jobs 2170 6511009 Advanced Query with wild card character * does not produce correct results. 2234 6549694 Sort on table column throws exception if explicit SORT specified in SimpleQuery Sort on table column 2245 6556389 Error.jsp contains unbalanced tagError.jsp contains unbalanced tag 2247 6556411 DBW queries "Average Job Turnaround Time", "Average Job Wait Time" might not work 2264 6555953 JGDI deleteJob crashes qmaster 2266 6563346 Wrong usage of 'day' format model in trunc(date) Oracle functions 2284 6565841 Oracle: rollback segments keep filling up, Postgres: delete query keeps running 2288 6567673 qlogin does not work on HP11 with N1GE6.0 u11 2309 6572801 sge_queue_values definition does not contain PRIMARY KEY 2317 6574565 Oralce, Postgres FOREIGN KEY fields need to be indexed 2339 6586817 RQS can break allocation_rule 2350 6595856 Galore use of drmaa_job_ps(3) can cause performance decline 2354 6598005 ORDER BY clause ignored in Advanced Query 2364 6615165 Need means to simulate large numbers of execution nodes 2370 6533487 Need to have file descriptors limit set for jobs 2378 6610855 -masterq may not break slave task preference due to soft/queue sort method 2391 6613438 'Infinity' must be rejected when specified in 'complex_values' or RQS limits for consumables 2392 6614108 Specifying more than one drmaa_v_env attribute causes spurious error msg 2404 6618328 qmon displays wrong string for queue filtering 2415 6620930 ARCO view_accounting filters out parallel job usage incorrectly 2422 6609633 qconf -Mconf is missing 2426 6627903 Need GNU-lib mtrace()/muntrace() support in qmaster for hunt on memory leaks 2432 6722217 Invalid qconf -mrqs crashes qmaster with segmentation fault 2434 6634786 ARCo online help contains invalid, unclear or outdated information 2439 6638329 Reporting 'View' dropdown menu and 'Save Result' functionality is confusing 2441 6638472 ARCo should support multi-clusters 2443 6655773 0.5 Java language binding and 0.95 C language binding should be dropped for 6.2 2444 6640762 Row Limit in Simple Query uses wrong syntax 2448 6643273 dbwriter should support schemas for Postgres db installation 2449 6647676 RQS: Line wrap of host list introduces syntax error 2450 6644709 dbwriter should write checkpoint to database 2451 6572326 need option to suppress individual accounting records in tightly integrated parallel jobs 2452 6647681 dbwriter deletion rules delete tasks of pe_jobs 2457 6649528 execd can take 100% of CPU usage 2469 6652219 change of a load value not propagated from exec to qmaster due to load report protocol optimization 2470 6649605 Advanced reservation "-he no" option is broken 2472 6655195 qquota broken if quota definition contains "hosts" or "users" scope negation 2475 6671963 Access_list(5) man page not precise enough with regards secondary/primary group(s) 2476 6657521 RQS debitation of running jobs is broken if enabled by -mattr 2483 6653424 Long qmaster startup time in large clusters with many jobs 2486 6661461 Row Limit in ARCo Simple Query builder cannot be empty 2487 6661470 Sort order and row limit cannot be specified together in ARCo Simple Query builder 2491 6670879 Resources get blocked when a parallel jobs host is not reachable 2513 6698155 Missing entry in User's Guide - failure codes 2521 6675592 shadow_masters file might contain some hosts twice 2523 6677192 incorrect depencency on xinetd in init scripts for linux 2529 6677885 Latebindings for Advanced Queries does not work 2536 6680905 Switching from Simple Query to Advanced Query removes the Latebingings 2555 6688666 loadcheck prints error message "kstat finds too many cpus" 2565 6694003 ARCo should not print exception stack trace in the console 2566 6684968 TABLESPACE values should be written to dbwriter.conf 2574 6716772 execd install fails on OS X when qmaster boot scripts are present 2575 6704393 error message given by qalter -q '' suggests a memory access problem 2598 6708891 qalter -w v must reject operating on already finished jobs 2603 6710983 qsub option -q breaks -masterq 2605 6711578 load scaling display not working correctly 2606 6710485 qstat -j does not print array task information 2607 6712685 qalter -w v wrongly changes job attributes 2608 6562277 job hold due to -hold_jid is not indicated as STATE_SYSTEM_ON_HOLD by drmaa_job_ps(3) 2611 6713785 A load sensor reporting values for other hosts does not work 2615 6710542 reporting file is lacking information about global consumables, if log_consumables=false 2619 6716648 sge_ca script does not allow easy sdm_admin keystore creation 2620 6715561 Wallclock_Time query should be more constrained 2624 6692104 "./install_execd -winsvc -auto /path/to/auto.conf" command causes error 2625 6723130 install fails with mutually dependent subordinate queues 2634 6589820 The default has to be local spool directory when install_execd is run for a Windows host 2641 6720078 qmaster runs out of memory on AIX 2642 6713362 dbw install parameters are not verified 2644 6716082 Incorrect slots_total from qstat -F -xml output 2646 6724576 jmx keystore property is wrong for non default keystore location 2647 6723932 install_qmaster -jmx fails if non default keystore path is used 2648 6254021 arcorun: Unexpected Error: Could not load the translet class 'GregorSamsa' 2649 6254027 PDF output does not span over multiple pages 2650 6724877 memory leaks to be fixed in 6.2 2652 6724949 qsub -w v does report success even when requirements are not fulfilled 2653 6725446 Ctrl-C in a qmaster running in debug mode does not trigger a proper shutdown 2655 6711517 /etc/services is not handled correctly during installation 2658 6726283 Qmaster message file contains logging about NULL ptr passed to host_list_locate() 2660 6726285 Wrong permissions if install_qmaster creates qmaster spool directory 2661 6726344 Installation of execution daemon left user unclear which port was chosen. 2662 6617973 qconf -aconf Unresolvablehost should not open the editor 2662 6618012 qconf -Arqs InvalidValue dumps core 2662 6618016 Several qconf options do not recognize invalid values and return error exit code 2669 6722925 qmaster installation displays "No CSP system installed" twice when no CSP 2672 6728262 qmaster crashes while project deletion (qconf -dprj) in a special case 2676 6729353 Exception occurs during the exportation of a query result to pdf 2677 6728406 tr command has wrong replace arguments in some places 2678 6727751 Installation fails when another cluster already uses RC scripts on Linux Bugs fixed in SGE 6.2beta2 since release 6.2beta ------------------------------------------------ Issue Sun BugId Description -------- --------- ------------------------------------------------------------------------------------------ - 6712075 Exception in reporting when running query after running result - 6707944 Suggested improvement for qrsub -help - 6692609 Qmon shows an identical icon for "job control" and "advance reservation" - 6706406 Allow qmon to submit jobs against an AR. Other AR suggestions also included. - 6698169 data used for service tags registration is incorrect - 6715369 Argument not passed from SetupRcScriptNames() - 6692677 Stopping qmaster may stop shadowd SMF service in some cases - 6695278 sgemaster does not start/stop both qmaster, shadowd SMF services - 6692668 sge_smh.sh does not work as standalone script 470 6707286 Change in STATIC field ignored by resource property framework 469 6707073 installation of managed host failes with no -al switch and with user/passwd authentication 466 6706153 when shutdown all components with -all switch and then start them up we will ge NullPointerException 465 6705575 shutdown of component with -all switch doesnt work 464 6704408 SCP refresh does not handle correctly updated resources 463 6703875 SCP reset resource event not handled correctly 462 6703670 shutdown spare_poll with -force flag cause some exception into logs while shutdown jvm 457 6702277 Advanced filtering for Reporter not working correctly. 455 6702262 Missing GE Adapter Mappings for Darwin architecture 450 6702267 Installing SDM in "system" mode with default local spool fails 382 6696919 Remove ComponentState.UNKNOWN and introduce ComponentState.ERROR 2618 6715373 Qping -dump output corrections 2617 6715371 Reduced connection message disables hostname resolving verification 2616 6715366 Improve reverse ip hostname resolving behaviour 2602 6710417 schedd_runlog file will not be created when qconf -tsm is used 2604 - Installation fails on Ubuntu 8.04 2600 6709229 service tags cannot be disabled from auto-install 2599 6709231 install fails creating unique cluster name 2597 6650497 use of -l tmpdir=abc can crash schedd 2596 6696331 setting of QMaster port number leads to infinite loop 2595 6704283 qconf -as, -am, -ao, -Ae, -Acal, -Ackpt, -Ap when msg "already exist" should return not 0 exit code 2595 6597558 qconf -acal doesn't return error code 1 when failed 2595 6546280 qconf -dxxxx does not set exit status on error 2595 6652411 qconf -ae|-Ae return 0 even if exechost exists already 2591 6707847 sge_schedd can core dump when resoruce quotas are used 2590 - Remove // from include paths 2588 - Various link issues 2587 - Fix aimk to not reference undefined variable 2585 - Need to strip non -D and -I flags from sge_depend calls 2584 - Patch to support Linux pp64 2580 6638371 Solaris support for processor field in queue_conf(5) is missing 2579 6653487 bootstrap(5) man page sees itself als sge_conf(5) 2578 6659269 spelling mistakes in man pages 2577 6680939 grid engine man page for qconf option -shgrp_resolved does not show required arguement 2573 6704271 Incorrect documentation for xprojects setting in sge_conf(5) 2572 6648160 SGE util/arch script is broken for AIX 5.3 Operating System 2567 6666161 Incorrectly considering two host group names to be the same 2549 6673782 Configuration file check of automatic installation does not recognize remsh 2543 6707055 32-bit Linux binaries are having problems with file access in 64-bit NFS environments 2484 6660407 qalter man page is imprecise regarding to -l name=value for running jobs 2478 6623174 Failed to deliver STOP signal for subordinated jobs 2348 - Build fails with bleeding edge glibc (fedora development)